User manual

ADT-HC4500 CNC Flame/Plasma Controller
21
14. Movement of work piece
Picture 1 Picture 2
To save the steels during the processing, you can move the tracks of work piece to a certain place for
processing when cutting some kinds of figures. As shown in above pictures, the out frame is the steel plate,
and the inside frame is the figure to be cut. For example, it may waste many materials if you cut the “work
piece 2” directly after having cut the “work piece 1”, because they are a certain distance away. Therefore, you
can move the track of work piece to a proper place as Picture 2 before cutting, which can save many materials.
Detailed operations are as follows:
Press [STOP] key after you have cut the “work piece 1” → Press [X+], [X-], [Y+], and [Y-] to move
the cutting gun to the proper position.
15. Line and point selection
This function allows you to select any line of G code of the figure for processing.
In main menu, press [F1] (Auto) → [F4] (Grap) → [F4] (Pro) → [F2] (ChoG) to enter the interface
of positioning mode as follows:
Work piece 1
Work piece 2
Work piece 1
Work piece 2