User manual

ADT-HC4500 CNC Flame/Plasma Controller
48
3.1.3 USB disk
In interface as Picture 3.1, press [F3] to enable the USB disk connecting function. If the USB disk is not
connected well or if the format of USB disk is not compatible with the system, the following interface will
show up:
Picture 3.1.3 USB disk is not connected
If the USB disk is connected, the interface will show the name of file stored in the USB disk, as the
following picture shows:
Picture 3.1.3.1 USB disk is connected successfully
At this time, press [Y+] or [Y-] to select the processing files that need to be copied, and then press [F2]