User manual

ADT-HC4500 CNC Flame/Plasma Controller
4
II. Statement:
We offer one year factory warranty or lifetime maintenance for any malfunction arising under the normal use.
In case of man-made damage or if the warranty expired, ADTECH will charge a certain cost price of parts.
However, the warranty is not applied to the following conditions:
 The label of serial number is torn down.
 Any damage caused by personal factors
 Any damage caused by natural disasters
 Disassembly, modification, or repair without permission
III. Maintenance
1. Notice for maintenance and inspection:
 Cut off the power supply of major loop before maintaining or repairing the controller.
 To prevent the accident, the operator should confirm the power supply is cut off.
2. Inspection item and period:
Under the general operating conditions (Daily average 30°C, load rate 80%, operating ratio 12 hours per
day), carry out the following items to do the route and periodical inspections.
Route inspection Daily
● Check whether the ambient temperature, dust and foreign
matters exceed the criteria
● Check whether there is abnormal vibration or sound
Periodical inspection Half year
● Check whether the firm parts are loosened
● Check whether the terminal board is damaged