User manual

ADT-HC4500 CNC Flame/Plasma Controller

2. In case of similar Chinese with two Bytes a word, please name it as config2.ini,

In case of similar English with one Byte a letter, please name it as config3.INI

3. Translate the content behind “=” in new file to Chinese, while other contents do not change.

4. For any question, please compare the English configuration file of config1 with the Chinese

one in folder ADT.

Note:

1. Character ';’ acting as the ending mark of configuration value, can be followed by remark.

2. It is not allowed to have sign '=' in remark and the value of configuration parameter.

3. It is not allowed to change the sequence of parameter in every interface, and do not use '[]';

4. To add new parameter, please add at the end of the interface;

5. When translating, due to the small controller screen, the number of character should be

strictly controlled for the parameters;

6. The content in '[]' should not be translated;

7. If it is blank behind the equal sign, it is to reserve a space for the previous line, which means

that it can write the exceeding part of translation of the previous line.

For example: (Chinese)

1.[开机界面]

[1] =深圳众为兴数控技术有限公司;(≤60 Byte)

[2]=;

[3] = …;

Translation:

1. [Starting interface]

[1]=ADTECH CNC TECHNOLOGY;

[2]= CO., LTD (SHENZHEN);

[3] = …;

5. If there is any doubt, Please refer to translation docomet or contact suppler.