User`s manual

ADT-8840 Four-Axis Off-Line Motion Control Card User’s Manual

http://www.adtechcn.com 1

Declaration on Copyright

The copyright of all parts in this Manual is reserved by ADTECH (SHENZHEN)

CNC TECHNOLOGY CO. LTD (hereinafter referred to as “ADTECH”) and, without

permission by ADTECH, nobody shall reproduce, copy, transcribe or translate any

part therein. No part of this Manual shall be considered as warranty, expression of

standpoint or other implications in any form whatsoever. If any information is

disclosed, either directly or indirectly, any profit is lost or undertaking is terminated

just because of the information indicated in this Manual or on the product it describes,

ADTECH and its employees shall bear no responsibility. In addition, the

specifications and other materials mentioned in this Manual shall only be used for

reference and the contents therein shall be subject to change without prior notice.

Trademark

The product names are only mentioned in this Manual for the purpose of identification,

which may be the trademark of others or whose copyright is reserved by others. We

hereby declare that:

※ INTEL and PENTIUM are the trademarks of Intel Corporation;

※ WINDOWS and MS—DOS are trademarks of Microsoft Corporation;

※ ADT-8840 is the trademark of ADTECH;

※ Marks not mentioned here belong to their respective companies that

underwent the registration procedures.

ADTECH (SHENZHEN) CNC TECHNOLOGY CO. LTD