User manual

Chapter 9. Transaction Language 1 (TL1)
9-10 MX2810 M13 User Manual 61185001L1-1
the time in HH-MM-SS format, and whether the alarm is NEND of
FEND ("Near End" or "Far End").
An example of an autonomous message event is:
Unit 1 01-10-09 16:21:10
A 22 REPT EVT EQPT
"405:PROTNA,TC,10-09,16-21-10,NEND,,,,"
In this example, "Unit 1" is the unit ID or <tid> that was set in the
menus. "01-10-09 16:21:10" is the date and time stamp. The "A"
indicates this is a non-alarm message. "22" is the <atag> that is
automatically generated. "REPT EVT EQPT" is the <verb> and its
modifiers. The "405:PROTNA,TC,10-09,16-21-10,NEND,,,," is the
message. The message contains the <aid>, then the type of event,
tells that it is a transient condition (TC), the date in MM-DD format,
the time in HH-MM-SS format, and whether the event is NEND of
FEND ("Near End" or "Far End").
The MX2810 specifically uses “quoted line(s)” in REPT-ALM and
REPT-EVT autonomous messages. The REPT-ALM message has
the following quoted line format:
The NTFCNCDE field will contain one of the following values:
• CL - Alarm Cleared
• TC - Transient Condition
•MN - Minor
•MJ - Major
• CR - Critical
The REPT-EVT message has the following quoted line format:
The CONDEFF field will contain one of the following values:
• CL - Standing Condition Cleared
• SC - Standing Condition Raised
• TC - Transient Condition
<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,<OCRDAT>,<OCRTM>,<LOCN>…
<AID>:<CONDTYPE>,<CONDEFF>,<OCRDAT>,<OCRTM>,<LOCN>…