User manual

Chapter 8. Remote/Management Menus
8-2 TDU 120e User Manual 61202156L1-1
Units accessed via T-Watch Pro over TCP/IP use the unit ID
and passcode set by T-Watch Pro running on the PC.
Figure 8-1. Unit Access Table
Table 8-1 on page 8-3 describes each command of the Unit
Access Table.
It is not necessary to have an entry in this table for a remote unit
in order to telnet to it or forward SNMP traps from it. In the tel-
net case, the Remote Menu Access menu is selected from the
Main menu and a unit ID is entered which may or may not be in
the Unit Access Table.
____________________________Unit Access Table________________________
Unit ID Passcode Type Polled Poll Status
20
3
6
8
DEFAULT
0033
0095
0022
Standard
Standard
TSU Standalone
Standard
No
Yes
No
Yes
UP
UP
1) Add New Unit
2) Modify Unit
3) Delete Unit
4) Default Unit Passcode
5) OK
0022