Product specifications

61180008L1-5B Section 61180008L1-5, Issue 2 7
Figure 2. System Controller Menu Tree
1. Configuration 2. Provisioning 3. Test 4. Alarms 5. Management Configuration 6. Security
Usernames (1-16)
1. User Name
2. Password 3. R/W 4. Test 5. Admin 6. Delete This User
Enter New User Name
Enter New Password
1. Read-Only 2. Read/Write
1. Disabled 2. Enabled
1. IP Address
2. IP Subnet Mask 3. IP Default Gateway 4. TELNET Port Number
Enter Value
5. TCP/IP Port Number 6. SNMP Configuration
Enter Value (1024 .. 9999)
1. Disabled 3. Major 2. Minor
1. Disabled 2. Enabled
1. Disabled 2. Enabled
1. Disabled 2. Enabled
1. Dual PSU
2. Single PSU
1. T1 Mapping 2. D4 Conventional
1. Force LIU Failover 2. SCU Reset
1. Alarm Relay Mapping
2. Log MLT Alarms 3. Ringer Alarms 4. AUX1 Alarm
1. Disabled 2. Enabled
5. AUX2 Alarm 6. RMT Alarm 9. PSU Configuration
1. None
Enter New Password
Enter Value
2. Local
1. SCU
2. Online LIU
1. Select Y-Modem Upload Destination 3. Modify Checksum
2. Start Y-Modem Upload 5. Reset the Y-Modem Destination 4. Compute Checksum and Store
Unit Name Part Number CLEI Code Product Revision Software Revision MAC Address
1. Disabled 2. Enabled
1. Terminal Auto-Logout 2. Auto-Logout Time
1. Disabled 2. Enabled
1. Date
Enter Value
Enter Value (1...60)
3. Terminal Auto-Logout 4. Password Authentification 5. Password
6. Target ID (TID)
7. RS-485 Interface
1. Client 2. Host
1. MTA Mode 2. MLT Mode
8. Interbank Communication Mode 9. Y-Modem Application
10. Test Access Mode
2. Time
11. Craft Port Baud Rate
1. Erase SCU
2. Cancel
Enter New Checksum
1. 9600 2. 38400
7. ACO Alarm
8. SLC-96 Pwr/Misc Alm (COT Only)
10. LIU Configuration
1. Dual LIU
2. Single LIU
1. SNMP Authentication Traps
2. Read-Only Community Name 3. Read-Write Community Name 4. System Contact 5. System Name 6. System Location
7. SNMP Trap Hosts 8. Re-Map Interface Indices
1. Disabled 2. Enabled
Enter Value
Trap Host 1-8
1. IP Address 2. Status
1. Enabled 2. Disabled
Enter IP Address