Installation Instructions

ManualsBrandsAdtran ManualsComputers & AccessoriesWiFi 5 Mesh AP

uick Star

Overview

The ADTRAN® 831-t5 is a carrier-class Dual-Band Wi-Fi 5 Gigabit Ethernet router, built to deliver top-end Wi-Fi 5 performance, true gigabit routing

throughput, and advanced service delivery capabilities. This quick start describes how to install ADTRAN’s 831-t5 Service Delivery Gateway.

The 831-t5 WiFi 5 Mesh Extender Access Point (AP) is an indoor gateway delivering premium multi-gigabit services.

■ “Installing the 831-t5 Gateway” on page 2

■ “Product Specifications” on page 4

■ “Safety and Regulatory” on page 4

Figure 1 illustrates the front and back of the 831-t5 gateway.

Figure 1. Front and Back of the 831-t5 Gateway

WARNING!

Read all warning, cautions, notes and installation instructions before installing or servicing this equipment.

f ATTENTION!

Lisez tous les avertissements et mises en garde avant l’installation de cet équipement ou la réalisation de toute opération de maintenance

f WARNING!

f CAUTION!

g NOTE

WARNING indicates a hazard which, if

not avoided, could result in death, injury

or serious property damage.

CAUTION indicates a hazard which, if not

avoided, could result in service interruption,

damage to the equipment, or minor property

damage.

NOTES inform the user of additional, but

important, information or features.

ADTRAN

831-t5 Service Delivery Gateway

Wi-Fi 5 Mesh Extender Access Point

August 2021

617600031F1-13A

P/N: 17600031F1

Summary of content (9 pages)

PAGE 1
ADTRAN August 2021 617600031F1-13A 831-t5 Service Delivery Gateway Quick Start Wi-Fi 5 Mesh Extender Access Point P/N: 17600031F1 Overview f WARNING! Read all warning, cautions, notes and installation instructions before installing or servicing this equipment.
PAGE 2
Features The features of the 831-t5 gateway include the following Subscriber interfaces: ■ 2x Gigabit Ethernet (RJ-45) interfaces ■ 1x USB 3.0 (Type A) Host port Installing the 831-t5 Gateway The following are guidelines for basic installation of the 831-t5. g f NOTE Refer to the national, state and local electrical codes for the requirements for power, grounding, wiring, and installation methods. CAUTION! The product is intended for indoor use only.
PAGE 3
f CAUTION! Ensure that the 831-t5 is not located in direct sunlight or next to any thermal obstructions. Wall Mount Installation The 831-t5 can be mounted on a wall. Wall Mount Kit (17600192F1) can be ordered for mounting the 831-t5. Instructions are provided in the related Quick Start Guide (617600192F1-13A). Connecting the 831-t5 Gateway Figure 2 illustrates the installation (connection) options for the 831-t5 gateway. Figure 2.
PAGE 4
Product Specifications Electrical ■ Power is provided by a 12V DC Power Adapter that is included with the 831-t5. The power adapter operates from a power source of 100 to 240V AC, 50 - 60 Hz. The nominal output is 12V DC +\–5% with a maximum current rating of 2.5 Amps. For US and Canadian applications, a UL Listed limited power source (LPS) is required. For deployment outside of North America, an LPS specifically approved for that country, such as a CE Mark, is required.
PAGE 5
831-t5 Service Delivery Gateway Safety and Regulatory Notice Sécurité et Avis de réglementation WiFi 5 Mesh Extender Access Point Sicherheitsvorschriften und -hinweise f WARNING! f AVERTISSEMENT! f August 2021 617600031F1-17a P/N: 17600031F1 WARNUNG! ■ Read all warnings, cautions, notes, and installation instructions before installing or servicing this equipment.
PAGE 6
■ Dynamic Frequency Selection (DFS) for devices operating in the bands 5250 - 5350 MHz, 5470 - 5600 MHz and 5650 - 5725 MHz. ■ The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. ■ Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650- 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
PAGE 7
CAN ICES-3(B)/NMB-3(B) Canadian Department of Communications Radio Interference Regulations This digital apparatus (WiFi 5 Mesh Extender Access Point Model 831-t5) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Industry Canada This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: 1.
PAGE 8
ADTRAN September 617600193F1-13A SDG-WM2 Wall Mount Kit Quick Start P/N: 17600193F1 Overview This quick start guide describes how to install ADTRAN’s SDG-WM2 Wall Mount kit. This kit can be used with ADTRAN’s 831-t5, 834-6/v6 and 841-t6 Home Gateway Units. Package Contents ■ ADTRAN’s SDG-WM2 Wall Mount bracket ■ Screws and wall anchors Prior to Installation Before installing the wall mount bracket, inspect it for damage.
PAGE 9
1. 2. 3. 4. 5. 6. Use the keyholes on the wall mount kit as a template and mark the wall accordingly. See Figure 1. Drill holes using a 1/4” (6mm) drill bit into the marks on the wall. Use a hammer to lightly tap the included wall anchors into the drilled holes until anchors are flush with the wall. Install four screws (included) into the anchor heads. Leave approximately 1/4 inch (6 mm) protruding from the mounting surface.