Specifications

Total Access 600R System Manual Section 1 System Description

Protocol Support

•IP

• DNS

•TCP

• RIP V1, V2 and static routes

• UDP, UDP Relay

•ICMP

•ARP

•PPP

•Frame Relay

Frame Relay

• Support for both point-to-point and point-to-multipoint networks using up to 10 PVCs

• RFC 1490 Encapsulation (Multiprotocol over Frame Relay)

• Signaling Types: LMI, Annex D (ANSI), Annex A (Q933A), and Static (No Signal)

PPP

• LCP, IPCP, BCP, CCP

• Van Jacobson (VJ) header compression

Routing Capability

• Ethernet: 10/100BaseT (RJ-45)

• IEEE 802.3 and 802.1D (MAC Bridging)

• IP Support: TCP, RIP V1, RIP V2, UDP, ICMP, ARP, UDP Relay, SYSLOG

• PPP Support: LCP, IPCP, BCP

• DHCP Server to LAN, DHCP from network (NAT)

Security

• PAP, CHAP, EAP, and Radius

• NAT/NAPT

• Packet filtering by source and destination IP address, source and destination port number, MAC

address, protocol or pattern

• Multi-layer password protection

• Telnet security: Access list and password protection

Integrated Components

•IP router

• Network connection

• 10/100BaseT connection

•

CRAFT port