User's Manual
Table Of Contents
- 6304W Configuration Guide_1.01
- 6304W ONU Gateway Configuration Guide
- CHAPTER 1 Getting Started
- CHAPTER 2 Logging into the Web GUI
- CHAPTER 3 Viewing Device Information
- CHAPTER 4 Viewing WAN Interface Information
- CHAPTER 5 Configuring WAN Interfaces
- CHAPTER 6 Configuring Wi-Fi
- CHAPTER 7 Viewing Wi-Fi Information
- CHAPTER 8 Configuring Voice Service
- CHAPTER 9 Configuring NTP
- CHAPTER 10 Configuring Static Routing
- CHAPTER 11 Restarting the Device
- CHAPTER 12 Reverting to the Default Setting
- CHAPTER 13 Upgrading Software
- CHAPTER 14 Configuring Backups
- CHAPTER 15 Restoring Configuration Files
- CHAPTER 16 Performing Diagnostics
- 组合 1
- 组合 3
- 6304W Installation Guide_1.01_部分1_部分1
- 组合 1
- 6304W Installation Guide_1.01_部分2
- 6304W Installation Guide_1.01_部分3
- 6304W Installation Guide_1.01_部分4
- 6304W Installation Guide_1.01_部分5
- 6304W Installation Guide_1.01_部分6
- 6304W Installation Guide_1.01_部分7
- 6304W Installation Guide_1.01_部分8
- 6304W Installation Guide_1.01_部分9
- 6304W Installation Guide_1.01_部分10
- 6304W Installation Guide_1.01_部分11
- 警语
- 组合 3
6304W Configuration Guide 33
CHAPTER 12 Reverting to the Default Setting
Reverting to the Default Setting
Follow these steps to revert to the default setting.
1 Connect your device to LAN 1 or Wireless.
2 Launch a web browser.
3 Connect to 192.168.1.1. A login screen displays.
4 Enter the user name and password. The home screen displays.
5 Select Management > Device> Factory Default.
6 Click Recovery Factory Set.