User's Manual
Table Of Contents
- 6304W Configuration Guide_1.01
- 6304W ONU Gateway Configuration Guide
- CHAPTER 1 Getting Started
- CHAPTER 2 Logging into the Web GUI
- CHAPTER 3 Viewing Device Information
- CHAPTER 4 Viewing WAN Interface Information
- CHAPTER 5 Configuring WAN Interfaces
- CHAPTER 6 Configuring Wi-Fi
- CHAPTER 7 Viewing Wi-Fi Information
- CHAPTER 8 Configuring Voice Service
- CHAPTER 9 Configuring NTP
- CHAPTER 10 Configuring Static Routing
- CHAPTER 11 Restarting the Device
- CHAPTER 12 Reverting to the Default Setting
- CHAPTER 13 Upgrading Software
- CHAPTER 14 Configuring Backups
- CHAPTER 15 Restoring Configuration Files
- CHAPTER 16 Performing Diagnostics
- 组合 1
- 组合 3
- 6304W Installation Guide_1.01_部分1_部分1
- 组合 1
- 6304W Installation Guide_1.01_部分2
- 6304W Installation Guide_1.01_部分3
- 6304W Installation Guide_1.01_部分4
- 6304W Installation Guide_1.01_部分5
- 6304W Installation Guide_1.01_部分6
- 6304W Installation Guide_1.01_部分7
- 6304W Installation Guide_1.01_部分8
- 6304W Installation Guide_1.01_部分9
- 6304W Installation Guide_1.01_部分10
- 6304W Installation Guide_1.01_部分11
- 警语
- 组合 3
Pre-Installation Considerations
2 6304W Installation Guide
• Ensure that the power supply is reliable. The input voltage fluctuation range
should be lower than 10%. The power plug should not share one socket with a
hair drier, an iron or a refrigerator.
Safety Cautions
• Read the user manual carefully before using the ONU.
• Do not use any accessory that is not shipped with the ONU without prior con-
sent of the manufacturer. This may cause fire or product damage.
• Use the power adapter that is shipped with the ONU.
• Do not place any object on top of the ONU.
• Keep the ONU dry, ventilated, and clean.
• If lightning occurs, unplug the power plug and all connection cables to protect
the ONU against lightning effects.
• Clean the ONU using a soft and dry cloth rather than liquid or atomizers. Turn
off the ONU before cleaning it.
• Turn off the ONU when it is not in use.
• Keep ventilation holes clean and prevent any object from entering ventilation
holes. This may cause short circuit and further cause product damage or fire. Do
not spray liquid on the surface of the ONU.
• Do not open the case of the ONU, especially when it is turned on.
• Before plugging or unplugging the ONU, ensure that the power is off. This is to
avoid surge.
• Be careful when unplugging the ONU, as the transformer may be very hot.