User's Manual
Table Of Contents
- 6304W Configuration Guide_1.01
- 6304W ONU Gateway Configuration Guide
- CHAPTER 1 Getting Started
- CHAPTER 2 Logging into the Web GUI
- CHAPTER 3 Viewing Device Information
- CHAPTER 4 Viewing WAN Interface Information
- CHAPTER 5 Configuring WAN Interfaces
- CHAPTER 6 Configuring Wi-Fi
- CHAPTER 7 Viewing Wi-Fi Information
- CHAPTER 8 Configuring Voice Service
- CHAPTER 9 Configuring NTP
- CHAPTER 10 Configuring Static Routing
- CHAPTER 11 Restarting the Device
- CHAPTER 12 Reverting to the Default Setting
- CHAPTER 13 Upgrading Software
- CHAPTER 14 Configuring Backups
- CHAPTER 15 Restoring Configuration Files
- CHAPTER 16 Performing Diagnostics
- 组合 1
- 组合 3
- 6304W Installation Guide_1.01_部分1_部分1
- 组合 1
- 6304W Installation Guide_1.01_部分2
- 6304W Installation Guide_1.01_部分3
- 6304W Installation Guide_1.01_部分4
- 6304W Installation Guide_1.01_部分5
- 6304W Installation Guide_1.01_部分6
- 6304W Installation Guide_1.01_部分7
- 6304W Installation Guide_1.01_部分8
- 6304W Installation Guide_1.01_部分9
- 6304W Installation Guide_1.01_部分10
- 6304W Installation Guide_1.01_部分11
- 警语
- 组合 3
6304W Installation Guide 11
CHAPTER 5 Configuring the ONU
This chapter provides instructions on how to configure the ONU.
Accessing the Internet
After you have successfully connected the ONU, you need to configure the ONU so
that it can obtain an IP address.
If the ONU only uses a serial number to access the Internet:
• After connecting the fiber to the ONU, wait approximately two minutes for an
Internet connection to be established.
If the ONU uses a serial number and EPON password to access the Internet:
1 Type 192.168.1.1 in the address field of a web browser. A login screen appears.
2 Enter the user name and password.
3 Click Network > TR069 > EPON Password. A dialog box appears.
4 Enter your EPON password in the text box and the click SAVE.
5 Wait approximately one minute for an Internet connection to be established.