Instruction manual

Section 4 User Interface Guide Total Access 850 System Manual

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > RX PKTS

Number of packets received on the T1 interface.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > TX BYTES

Number of bytes transmitted on the T1 interface.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > RX BYTES

Number of bytes received on the T1 interface.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > CURRENT UTIL (b/s)

Current utilization of the T1 interface bandwidth presented in bits per second.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > CURRENT UTIL (%)

Current utilization of the T1 interface bandwidth presented in percentage format.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > AVERAGE UTIL (b/s)

Average utilization of the T1 interface bandwidth (since the last stats reset) presented in bits per second.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > AVERAGE UTIL (%)

Average utilization of the T1 interface bandwidth (since the last stats reset) presented in percentage format.

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > TX PKTS

Number of packets transmitted on the T1 interface

L2 PROTOCOL (T1 TDM–T1–HDLC) > STATUS > CLEAR STATS

Clears all the gathered statistics for this interface and returns the counters to 0.

L2 PROTOCOL (T1 TDM FIRMWARE) – T1 INTERFACE > AUTO PROTOCOL

View the status of the T1 interface with the L2 PROTOCOL set to AUTO (using Auto-config feature).

L2 PROTOCOL (T1 TDM–T1–AUTO) > STATUS

View the status of the auto detect function and traffic flow for the T1 interface with an L2 PROTOCOL set to

AUTO.