Instruction manual

Section 4 User Interface Guide Total Access 850 System Manual
132 © 2004 ADTRAN, Inc. 64203376L1-1B
TX METHOD
Specifies the method the Total Access 850 uses to obtain PPP authentication
from the peer. There are four possible selections:
NONE The connection will not allow the PPP peer to
authenticate it.
PAP, CHAP, OR EAP The unit will ask for EAP during the first PPP LCP
negotiation and allow the PPP peer to negotiate
down to CHAP or PAP.
CHAP OR EAP The unit will ask for EAP during the first PPP LCP
negotiation and allow the PPP peer to negotiate
down to CHAP but not PAP.
EAP ONLY The unit will only allow EAP to be negotiated. If
the PPP peer is not capable of doing EAP, then
the connection will not succeed.
PAP ONLY The unit will only allow PAP to be negotiated. If
the PPP peer is not capable of doing PAP, then
the connection will not succeed.
RX METHOD
Specifies the method the Total Access 850 uses to authenticate the PPP peer.
There are four possible selections:
NONE The connection will not allow the PPP peer to
authenticate it.
PAP, CHAP, OR EAP The unit will ask for EAP during the first PPP LCP
negotiation and allow the PPP peer to negotiate
down to CHAP or PAP.
CHAP OR EAP The unit will ask for EAP during the first PPP LCP
negotiation and allow the PPP peer to negotiate
down to CHAP but not PAP.
EAP ONLY The unit will only allow EAP to be negotiated. If
the PPP peer is not capable of doing EAP, then
the connection will not succeed.
PAP ONLY The unit will only allow PAP to be negotiated. If
the PPP peer is not capable of doing PAP, then
the connection will not succeed.
PPP
Configure the PPP specific parameters such as MAX CONFIG, MAX TIMER, MAX FAILURE,
and
FORCE PEER IP ADDRESS from this menu.