Manualshelf

Instruction manual

ManualsBrandsADTRAN ManualsHardware850
141142143144145146147148149150
Total Access 850 System Manual Section 4 User Interface Guide
64203376L1-1B © 2004 ADTRAN, Inc. 145
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > RX ERRORS
Number of packets received in error and dropped.
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > CRCS
Number of packets detected with CRC errors.
L2 PROTOCOL (ALL–ETH–802.3]) > STATUS > RX COLLISIONS
Number of collisions which occurred during reception.
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > NON-ALIGNED
The NON-ALIGNED parameter is set when the number of bits received is not divisible by 8.
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > CLEAR COUNTS
Selecting this activator clears all the Ethernet stats.
BRIDGE
Configure the bridge parameters and view bridging statistics from this menu as shown in Figure 7.
Figure 10. Bridge Menu
BRIDGE > CONFIG
Configure the interfaces and bridge table parameters from this menu.