Instruction manual

Section 4 User Interface Guide Total Access 850 System Manual
156 © 2004 ADTRAN, Inc. 64203376L1-1B
SPOOFED PORT
Spoofed port number for the translation. The Total Access 850 often needs to use the spoofed
ports to determine which private device to translate the packet to. This would be necessary if
multiple applications using the same private port were occurring simultaneously.
SERVER PORT
Port number used by the server (public device).
TOTAL TIME UNUSED
Time the translation has been unused, in seconds.
IN COUNT
Number of inbound packets using this translation.
OUT COUNT
Number of outbound packets using this translation.
NAPT ADDRESS
(Read only) Displays the NAPT address for the router. This will either be the interface address or
the user-specified NAPT address.
ENTRY COUNT
The number of translation entries that are currently available in the NAT VIEW table. The
Total Access 850 supports up to 2000 active translations at any one time.
ENTRY OVERFLOW COUNT
The number of overflow NAT VIEW entries. After the maximum number of translations is
reached, the Total Access 850 will not add new translations, but continues to keep a count of any
new translation requests it cannot accommodate.
RIP
Use this menu to enable RIP on this interface.
VERSION
Enables or disables RIP and specifies the RIP protocol. Choices are: OFF (which disables RIP),
V1 (RIP Version 1) or V2 (RIP Version 2). The default is OFF