Instruction manual

Total Access 850 System Manual Section 4 User Interface Guide

NEXT OPER

The next operation to use to combine with the next filter in the list (default is END).

END the last filter to combination.

AND logically AND this filter with the next filter in the list.

OR logically OR this filter with the next filter in the list.

HIT COUNT

Displays the number of packets that match the criteria for the defined filter.

OUT TO VC

The packets which come from the unit to the WAN can be filtered in three ways:

DISABLE (DEF) Turns off packet outputs filtering. No outgoing packets are blocked.

BLOCK ALL All outgoing packets to the WAN are blocked except as defined in the

ECURITY > FILTERS > INTERFACES > SETUP > OUT EXCEPTIONS list.

FORWARD ALL All outgoing packets to the WAN are not blocked except as defined in the

ECURITY > FILTERS > INTERFACES > INTERFACES > SETUP > OUT

XCEPTIONS list.

OUT EXCEPTIONS

This is a list of up to 32 filter entries which can be combined using the operations field. The

operations are performed in the order they appear on the list.

Indicates the entry number in the In Exceptions table.

ACTIVE

Turns this entry active when set to YES. Default is NO.

TYPE

Selects the filter define list to reference (default is MAC):

MAC from the SECURITY > FILTERS > FILTER DEFINES > MAC FILTER DEFINES

list.

PATTERN from the SECURITY > FILTERS > FILTER DEFINES > PATTER FILTER

EFINES list.

IP from the SECURITY > FILTERS > FILTER DEFINES > IP FILTER DEFINES list.