Instruction manual

Section 5 DLP-7 Total Access 850 System Manual

1. Connect to the Total Access 850 using the 10/100BASET interface.

If you are not already connected to the unit’s ETHERNET port using Telnet client software, use the

procedure in DLP-5, Connecting to the Total Access 850 Using Telnet, to connect to the unit.

2. Log in to the unit using the read-write password (see DLP-2, Logging in to the System for details).

3. Verify the TFTP server is running on the network.

The user may ping the TFTP server from the Total

Access 850 to verify communication.

4. Download the firmware upgrade file to your computer.

5. Go to the S

YSTEM UTILITY menu and select the UPDATE FIRMWARE menu; press <Enter>.

6. Go to the T

RANSFER METHOD menu and select TFTP.

7. Set the TFTP S

ERVER ADDRESS to the IP address of the machine running the TFTP server program.

8. Enter the filename of the update file into the TFTP S

ERVER FILENAME field. If the file is located in a

directory other than ADTNUTIL, the entire path and filename are required.

Perform the steps below in the order listed.

A TFTP server ships as part of the ADTRAN Utilities. If using ADTRAN Utilities, choose

TART > PROGRAMS > ADTRAN UTILITIES > TFTP SERVER to start the server.

If using ADTRAN Utilities, save the upgrade file to the “ADTNUTIL” directory on your

hard drive.

If using ADTRAN Utilities, this will be the IP address that appears in the TFTP SERVER

TATUS window.