Instruction manual

Section 5 DLP-13 Total Access 850 System Manual
250 © 2004 ADTRAN, Inc. 64203376L1-1B
Saving the router's configuration
1. Establish a connection to the router with the VT100 terminal software either through the rear CRAFT
or RCU faceplate CRAFT port.
2. From the main menu, select S
YSTEM UTILITY, then TERMINAL MODE; press <Enter>.
3. The following screen appears.
4. At the terminal prompt, type DOWNLOAD; press <Enter>. The following screen appears.
*
Perform the steps below in the order listed.
Do not enter further key commands until completing Step 5.