Instruction manual

Section 5 DLP-15 Total Access 850 System Manual

1. Log in to the system with maximum rights (see DLP-2, Logging in to the System). Once you have

logged into the Total Access 850, go to S

YSTEM CONFIG/SYSLOG. Set the options as follows:

• SYSLOG IP: Enter the IP address of the PC where the Syslog host resides

•

SYSLOG FORMAT: Specify the Syslog format as either ADTRAN (to work with ADTRAN Utilities)

UNIX (to work with a standard UNIX Syslog server)

•

SYSLOG FACILITY: Specify the facility destination of log events; Options are LOCAL0 to LOCAL7

1. On your PC, go to S

TART/PROGRAMS/ADTRAN UTILITIES/SYSLOG. When the Syslog window opens,

you will see L

OCAL0 through LOCAL7 listed on the left. This should correspond with the HOST FACILITY

specified in the Total Access 850. The Syslog program must be open on your PC in order for it to

record Total Access 850 information. The Syslog files can be viewed through the Syslog window, and

they are also available under the ADTRAN Utilities Folder named L

OCALX.TXT, where X can equal 0

through 7. You can also view the L

OCALX.TXT file by clicking on EDIT LOG.

Setting up the Total Access 850 to use Syslog:

Setting Up the Syslog Host: