Instruction manual

Total Access 850 System Manual Section 3 Network Turnup Procedure

Contents of ADTRAN Shipments

Your ADTRAN shipment of the Total Access 850 chassis includes the following items:

• The Total Access 850 Base Unit

• The Total Access 850 Series System CD

• Wallmount brackets and screws

• RJ-45 to RJ-45 8-pin cable (15 ft) - ADTRAN P/N 3125M008

• UL 1950 Notice Card - ADTRAN P/N 61200375L1-17

4. TELECOMMUNICATIONS CODES

The installation configurations codes are given below.

5. GROUNDING INSTRUCTIONS

To following paragraphs provide grounding instruction information from the Underwriters’ Laboratory

UL1950 Standard for Safety of Information Technology Equipment Including Electrical Business

Equipment, of July 28, 1995.

An equipment grounding conductor that is not smaller in size than the ungrounded branch-circuit supply

conductors is to be installed as part of the circuit that supplies the product or system. Bare, covered, or

insulated grounding conductors are acceptable. Individually covered or insulated equipment grounding

conductors shall have a continuous outer finish that is either green, or green with one or more yellow

stripes. The equipment grounding conductor is to be connected to ground at the service equipment.

The attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type,

Customer must supply Ethernet cable and the DB-9 serial cable for configuration via the

VT100

CRAFT interfaces.

Table 1. Total Access 850 System Codes

CODE IN OUT

PC FC

IC E–

TC XX

Table 2. Power Supply Unit Codes

CODE IN OUT

PC FC

IC E–

TC A–