Instruction manual

Total Access 850 System Manual Section 4 User Interface Guide

SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS > AUTHEN METHOD

Set up the Telnet authentication method from this menu. The choices are LOCAL PASSWORD, RADIUS,

LOCAL/RADIUS, and RADIUS/LOCAL. LOCAL/RADIUS indicates that the unit will try Local Password

Authentication first, and if that fails, it will try Radius Authentication.

RADIUS/LOCAL indicates that the unit

will try Radius authentication first, and if that fails, it will try Local Password authentication. The default is

LOCAL PASSWORD.

SYSTEM CONFIG > MANAGEMENT > TELNET PORT

Defines the TCP port number used when establishing a Telnet session. Normal Telnet port is 23. Enter a

customized port number if desired.

SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS > USER LIST

Add Telnet users and control the Telnet access conditions through this menu.

Display the index number of the Telnet users. Up to four users can be configured for access to the

unit. Each user can be assigned a security level and idle time.

NAME

The name is a text string of the user name for this session. You can enter up to 15 characters in this

field. The factory default is no entry in the

NAME field.

PASSWORD

When the authenticating method is password, or password radius, this text string is used for the

password. You can enter up to 30 characters in this field. The factory default is no entry in this field.

IDLE TIME (MINS)

This sets the amount of time in minutes you can be idle before you are automatically logged off. The

factory default is

10 MINUTES. The range is 1 TO 255 MINUTES.

LEVEL

This is the security level granted to the user. Table 3 on page 78 gives a brief description of each

level. The factory default is

FULL.