Instruction manual

Section 4 User Interface Guide Total Access 850 System Manual
78 © 2004 ADTRAN, Inc. 64203376L1-1B
SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS > ACTIVE SESSIONS
Provides a list of all Telnet sessions currently active on the Total Access 850 system.
Table 3. Telnet Security Levels
Security Level Description
Full The user has all access to view and configure all menus (same as logging in to the
CRAFT port)
Support The user has read only access to view the SYSTEM INFO menu. The user has
privileges to view and change everything under the S
YSTEM CONFIG menu except for
the CRAFT port settings, Telnet access lists, and the SNMP management
communities. The user has full access to the S
YSTEM UTILITY menu, including the
ability to upgrade firmware and reset the unit. The user has full access to the
I
NTERFACES, L2 PROTOCOL, BRIDGE, ROUTER, and DS0 menus. The user does not
have the ability to set R
ADIUS SERVER settings under the SECURITY menu.
Config The same privileges as support, except that the user does not have privileges to
download firmware or configuration from the S
YSTEM UTILITY menu. The user
additionally does not have the privilege to reset the unit remotely, or enter the terminal
menu.
Router The user has read only privileges for the SYSTEM INFO menu. There is no access to the
S
YSTEM CONFIG menu. The user has PING and TRACEROUTE access from the SYSTEM
U
TILITY menu. The user is limited to Ethernet configuration and status from the
I
NTERFACES menu. The user has full access to the BRIDGE and ROUTER menus.
Access is limited to filters only from the S
ECURITY menu.
Voice The user has read only privileges for the SYSTEM INFO menu. The user has access to
the P
ING and TRACEROUTE utilities from the SYSTEM UTILITIES menu. The user has full
access to the FXS module from the I
NTERFACES menu.
Status The user has read access of all menus except for the following: SYSTEM
C
ONFIG/CRAFT PORT, SYSTEM CONFIG/TELNET ACCESS, SYSTEM CONFIG/SNMP
M
ANAGEMENT, and SECURITY/ RADIUS SERVER. The user does not have access to
U
PGRADE FIRMWARE, UPGRADE CONFIG, PING, or TRACEROUTE menus. The user
cannot reset the unit or enter terminal mode.
#
Displays the index number of the Telnet user.
NAME
Displays the text string entered in the Telnet configuration for this user.
PORT
Displays the TCP port used for this Telnet session.
TIME TO LIVE
Displays the amount of time (in minutes) before this Telnet session is terminated by the Total Access
850.