Instruction manual

Total Access 850 System Manual Section 4 User Interface Guide

SYSLOG using Terminal Mode

Another option for configuring syslog is using the terminal mode command log dump <logname>. The

logname must be all CAPS and be one of the following names:

FATAL

ALERT

CRITICAL

ERROR

WA RNING

NOTICE

INFO

FILTER

DEBUG

The command will dump all messages for the indicated log (

ALL LEVEL shows all log messages) stored in

the internal log buffer to the command line display.

SYSTEM CONFIG > SYSLOG > ALL LEVEL

This entry allows setting the default reporting level for all log entries. If ALL LEVEL is a lower priority than

the individual log entry level,

ALL LEVEL overrides the individual log reporting level.

SYSTEM CONFIG > SYSLOG > KERNEL LEVEL

Minimum required level for sending KERNEL log messages.

SYSTEM CONFIG > SYSLOG > DHCP LEVEL

Minimum required level for sending DHCP log messages.

SYSTEM CONFIG > SYSLOG > NTP LEVEL

Minimum required level for sending NTP log messages.

SYSTEM CONFIG > SYSLOG > TFTP LEVEL

Minimum required level for sending TFTP log messages.

SYSTEM CONFIG > SYSLOG > TELNET LEVEL

Minimum required level for sending TELNET log messages.

SYSTEM CONFIG > SYSLOG > IP LEVEL

Minimum required level for sending IP log messages.

SYSTEM CONFIG > SYSLOG > PPP LEVEL

Minimum required level for sending PPP log messages.

SYSTEM CONFIG > SYSLOG > NAT LEVEL

Minimum required level for sending NAT log messages.