Instruction manual

Section 4 User Interface Guide Total Access 850 System Manual

SYSTEM CONFIG > NETWORK TIME > STATUS

This displays the current status of the time negotiation process. If an error is displayed, check all

connections and configurations to try to resolve the problem.

SYSTEM UTILITY

Use the SYSTEM UTILITY menu to view and set the system parameters shown in Figure 5.

Figure 5. System Utility Menu

SYSTEM UTILITY > UPGRADE FIRMWARE

Select the firmware upgrade method and perform upgrade from this menu.

SYSTEM UTILITY > UPGRADE FIRMWARE > TRANSFER METHOD

The customer can update firmware when unit enhancements are released.

The two methods for upgrading are

XMODEM and TFTP. (See the DLP section of this manual for more

information.)

TFTP requires a TFTP server running on the network. The unit starts a TFTP client function

which gets the upgrade code from the TFTP server. Selecting

XMODEM will load the upgrade code

through the

CRAFT port using any PC terminal emulator with XMODEM capability. The factory default is

TFTP.

SYSTEM UTILITY > UPGRADE FIRMWARE > TFTP SERVER ADDRESS

This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is

configured) of the TFTP server. The factory default is no entry in the

TFTP SERVER ADDRESS field.

SYSTEM UTILITY > UPGRADE FIRMWARE > TFTP SERVER FILENAME

This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the

upgrade code. The factory default is no entry in the

TFTP SERVER FILENAME field.