Manualshelf

Instruction manual

ManualsBrandsADTRAN ManualsHardware850
919293949596979899100
Section 4 User Interface Guide Total Access 850 System Manual
96 © 2004 ADTRAN, Inc. 64203376L1-1B
INTERFACES (T1) > STATUS > PERFORMANCE > CURRENT AND TOTALS > FS
FS (Frame Slip) - A frame slip is defined as one or more frame bit errors in a one-second interval.
INTERFACES (T1) > STATUS > PERFORMANCE > CURRENT AND TOTALS > LCV
LCV (Line Code Violation) - A Line Code Violation is defined as a Bipolar Violation (BPV), not including
the B8ZS code word if B8ZS is employed. The number displayed is
LCV events, which is defined as one or
more BPVs in a one-second interval.
INTERFACES (T1) > STATUS > PERFORMANCE > CURRENT AND TOTALS > SLP
SLP (Slip Error Event) - This occurs when a received frame is either repeated or deleted. A SLP error
indicates a timing problem.
INTERFACES (T1) > STATUS > PERFORMANCE > CURRENT AND TOTALS > UAS
UAS (Unavailable Seconds) - When 10 consecutive SESs have been logged, the unit is declared in an
unavailable state, the 10
SESs are cleared, and the Unavailable Seconds count begins to increment starting
with 10. The unavailable state is cleared when 10 consecutive non-SES seconds have occurred.
INTERFACES (T1) > STATUS > PERFORMANCE > EXTENDED
Provides statistics for the last 24 hours (in 15 minute windows) on key performance measures as specified
in ANSI T1.403 and AT&T TR 54016 for each of the T1 ports. Refer to the
CURRENT AND TOTALS
performance information for more details on listed statistics.
INTERFACES (T1) > STATUS > PERFORMANCE > CLEAR CURRENT DATA
Clears all statistics collected in the CURRENT AND TOTALS statistics table.
INTERFACES (T1) > STATUS > PERFORMANCE > CLEAR ALL DATA
Clears all statistics collected in the CURRENT AND TOTALS and the EXTENDED 24 hour statistics tables.
INTERFACES (T1) > STATUS > ALARMS
Displays current alarms and alarm history for T1 interface.
INTERFACES (T1) > STATUS > ALARMS > CURRENT ALARMS
Displays the current alarms on the T1 interface. An asterisk in a field indicates that an alarm is active.
LOS Loss of Signal. No signal detected on port interface.
RED
Not able to frame data received on the port.
Alternately referred to as Out of Frame (OOF).
YELLOW Remote alarm indicator (RAI) being received on port.
BLUE
Receiving unframed all ones from the port alarm
indicator signal (AIS).