Specifications
BlueSecure Controller Models
BlueSecureâ„¢ Controller Setup and Administration Guide 1-9
option is available to support direct connection of PoE access points like the BlueSecure 
1500 Access Point via the front-panel ports.
Bluesocket BSC Model Specifications
All products in the Bluesocket BSC family share the same HTML-based administrator 
console and software functions, and vary only in the number of users supported, data 
throughput, form factor, and network ports. The following table summarizes the 
Bluesocket BSC model specifications.
Figure 1-7: Bluesocket BSC-600
Table 1-1: Bluesocket BSC Model Specifications
Specification BSC-600 BSC-1200 BSC-2100
BSC-2200/
3200/5200
Physical 
dimensions
1U enclosure
Width: 380 mm  
(15 in)
Depth: 290 mm (11.5 
in)
Height: 44.5 mm  
(1.75 in)
1U enclosure
Width: 380mm  
(15 in)
Depth: 290 mm (11.5 
in)
Height: 44.5 mm  
(1.75 in)
2U enclosure
Width: 445 mm  
(17.5 in)
Depth: 450mm (17.7 
in)
Height: 89 mm (3.5 
in)
2U enclosure
Width: 445 mm  
(17.5 in)
Depth: 450mm  
(17.7 in)
Height: 89 mm (3.5 
in)
Environmental
Operating 
Temperature:
 10 to 35 
degrees C  
(50 to 95 degrees F)
Humidity:
 40 to 80%, 
non-condensing
Operating 
Temperature:
 10 to 35 
degrees C  
(50 to 95 degrees F)
Humidity:
 40 to 80%, 
non-condensing
Operating 
Temperature:
 10 to 35 
degrees C  
(50 to 95 degrees F)
Humidity:
 40 to 80%, 
non-condensing
Operating 
Temperature:
 10 to 35 
degrees C  
(50 to 95 degrees F)
Humidity:
 40 to 80%, 
non-condensing
Power 220 Watt, dual-
sensing, 110/240 V, 
50/60 Hz power 
supply
220 Watt, dual-
sensing, 110/240 V, 
50/60 Hz power 
supply
200 Watt, dual-
sensing, 110/240 V, 
50/60 Hz power 
supply
350 Watt, dual-
sensing, 110/240 V, 
50/60 Hz power 
supply
Network 
interfaces
Managed Interface
:
Four 10/100/1000 
Mbps/802.3af 
copper Ethernet front-
panel interfaces
Protected Interface
:
One 10/100/1000 
Mbps copper Ethernet 
interface.
Failover/Admin:
One 10/100 Mbps 
copper Ethernet 
interface
Managed Interface
:
Four 10/100/1000 
Mbps/802.3af 
copper Ethernet front-
panel interfaces
Protected Interface
:
One 10/100/1000 
Mbps copper Ethernet 
interface.
Failover/Admin:
One 10/100 Mbps 
copper Ethernet 
interface
Managed & Protected
: 
Standard - 10/100/
1000 Mbps copper 
Ethernet interfaces
Optional - Either 
interface (or both) can 
be 1000BaseSX fiber 
with SC-type 
connector
Failover:
10/100 Mbps copper 
Ethernet interface
4 GbE Interfaces 
(Managed Interface, 
Protected Interface 
and two for link agg.)
Standard - 10/100/
1000 Mbps copper 
Ethernet interfaces
Optional - Can be 
1000BaseSX fiber 
with SC-type 
connector
Failover:
10/100/1000 Mbps 
copper Ethernet 
Admin:
10/100/1000 Mbps 
copper Ethernet 










