Specifications

Chapter 15: Status
15-18
Displaying the
Task Execution
Menu
Click the Status tab in the BSC administrator console, click the Diagnostics tab, and then
click the System link at the top of the page. The Task execution menu page appears as
shown in Figure 15-15.
Ping Use the standard Packet InterNet Groper utility to determine if the BSC can reach a
specified IP address over a specified network interface. Provide an IP address or fully
qualified domain name for the target host and specify the originating Ethernet port on the
BSC. Select Any to let the Controller decide based on routes.
Traceroute Use the standard TCP/IP utility to determine the route packets are taking from the BSC to
a specified host over a specified interface. Provide an IP address or fully qualified
domain name for the target host and specify the originating Ethernet port on the BSC:
Select Any to let the Controller decide based on routes.
Reset
BlueProtect
Cached Client
Scans
Reset all client BlueProtect Scanning Intervals. To force a client re-scan, log the client.
Figure 15-15: Task Execution Menu Page