Installation guide

BlueSecure™ Access Point 1800 Installation Guide
13
VI. Ceiling Mounting Kit for the BSAP-1800
The BSAP-1800 also comes with a ceiling mounting kit that enables the AP to be mounted on
the T-bar of standard drop ceilings.
To mount the BSAP-1800:
1. Attach the metal slider to the back of the BSAP-1800 using the two small screws. The slider
should still be able to slide after the screws are tightened.
Make sure that the slide is left in the same position as shown above.
2. Clip the metal ceiling bracket to a suitable location on the ceiling tile separator.