Instruction manual
6AOSAG0001-31A Copyright © 2011 ADTRAN, Inc. 57
APPENDIX A. CONFIGURATION AND LINE PARAMETERS
The following tables list all of the parameters found in the configuration files downloaded to each phone at
boot up. Table 12 below spans several pages and covers the Configuration Parameters. Table 13 on page 78
covers only the Line Parameters. The Source column defines the methods that can be used to change or set
the parameter including editing the configuration file, manually entering the setting from the phone’s user
interface, accessing the settings through the administrator’s Web interface, or using DHCP site-specific
option. The default settings are called out in the Description column. If no default is given, there is no
default setting present for that command.
Table 12. Configuration Parameters
Parameter Value Type Description Sources
AdminPassword ASCII
String
Sets the message digest 5 (MD5) hash of
the password to access the administrator’s
Web page. This password is saved in flash
memory after a value has been received in
a config file so it can be enforced on
subsequent reboots. It is cleared by the
restore factory defaults command. Only
the password in the hashed string can be
changed. The admin:Adtran: part cannot
be changed.
Default: MD5 hash of
“admin:Adtran:password”
Config File
AlertSelect 0 to 2 Sets the policy for handling a preselected
line on an idle phone when it rings.
0=No selection change
1=Select upon audible alert (default)
2=Select away to eligible idle preference
Config File
Web Interface
AppName ASCII
String
Characters
Indicates the name of the application
image in the phone. The application file
name can contain up to 24 characters. The
combination of file name and path can be
up to 32 characters long. A new
application name is specified in a
configuration file and is checked against
the version in flash to decide if a new
version needs to be downloaded.
Config File
BackLight 0 to 9999 Indicates the number of minutes the
backlight remains lit when the phone is
idle. The backlight turns on whenever
there is activity on the phone. A setting of
0 will leave the backlight on indefinitely.
Default: 5
Config File
Web Interface