Instruction manual

IP 700 Series Phone Administrator Guide Appendix A. Configuration and Line Parameters
6AOSAG0001-31A Copyright © 2011 ADTRAN, Inc. 75
SntpServer Up to 3
Comma
Separated
FQDNs or
IP
Addresses
Specifies a list of up to 3 time servers in
FQDN or dotted decimal format, from
which to retrieve the time and date
information. If from DHCP, only 1 server
may be specified.
Example:
192.168.0.1, 192.168.0.3, 192.168.0.4
The phone learns the time server location
through DHCP Option 42 and applies the
time zone offset available through DHCP
Option 2. If DHCP options are being used
to update the date and time on the phone,
this parameter should be commented out
in the configuration file by placing a #
before the parameter. For example,
#SntpServer.
DHCP
Config File
Web Interface
SpeakerLevels ASCII
String
Sets the speakerphone audio levels using
a comma separated list of the following
settings. The following default values are
listed next to the name:
TxGain 8192
RxGain1 258
RxGain2 410
RxGain3 649
RxGain4 1029
RxGain5 1631
RxGain6 2584
RxGain7 4096
RxGain8 5785
RxGain9 7283
RxGain10 10288
Speaker DTMF Attenuation 17
Caution: Do not change these values from
their defaults unless instructed by
ADTRAN Technical Support. Doing so
could break TIA-810 compliance.
Config File
Speed.n.Label ASCII
String
Assigns the label to a button when an
unused button is assigned to be Speed
button. Speed members are placed on
buttons not occupied by Line or DND
buttons in ascending order of n.
Config File
Phone Interface
Web Interface
Speed.n.Number Numeric
String
Assigns the number to be dialed out when
an unused button is assigned to be Speed
button.
Config File
Phone Interface
Web Interface
Table 12. Configuration Parameters (Continued)
Parameter Value Type Description Sources