Troubleshooting guide

Section 5, User Interface Guide - UIG-520, M13 MUX PM Statistics
61186003L1-1D 5-45
DS3 PM Far-End Parameter Descriptions
Table 5-31 provides DS3 PM far-end parameter descriptions that apply to C-Bit Framing only.
Table 5-31. DS3 PM Far-End Parameter Descriptions (C-Bit Framing Only)
DS3 PM Parameter Definition Description
Path
CVCP-PFE Code Violation, CP-
Bit Parity - Path
This parameter indicates the number of CP-Bit parity
errors that have occurred. This count is not incremented
when UAS are counted.
ESCP-PFE Errored Second,
CP-Bit Parity - Path
This parameter indicates the number of seconds with
one or more CP-Bit parity errors, one or more SEF
defects, or one or more Alarm Indication Signal (AIS)
defects. This count is not incremented when UAS are
counted.
SESCP-PFE Severely Errored
Second, CP-Bit
Parity - Path
This parameter indicates the number of seconds with 45
or more CP-Bit parity errors, one or more SEF defects, or
one or more AIS defects. This count is not incremented
when UAS are counted.
UASCP-PFE Unavailable Sec-
ond, CP-Bit Parity -
Path
This parameter indicates the number of seconds that the
DS3 path is unavailable. UASP-PFE accumulates at the
onset of 10 contiguous SESCP-PFEs and stop accumu
-
lating at the onset of 10 contiguous seconds without
SESCP-PFEs.