Troubleshooting guide

MX2820 System Manual
5-68 61186003L1-1D
STS-1 PM Far-End Parameter Descriptions
Table 5-34 provides STS-1 PM far-end parameter descriptions.
SES-P Severely Errored Sec-
onds - Path
This parameter indicates the number of seconds with x
or more coding violations at the Path Layer, or a second
during which at least one or more incoming defects at
the Path Layer has occurred (Values of x vary dependent
upon the line rate and the Bit Error Rate).
UAS-P Unavailable Seconds
- Path
This parameter indicates the time in seconds that the
Path Layer has been unavailable for data delivery.
PPJC-P Positive Pointer Jus-
tification Count - STS
Path Detected
This parameter indicates the increment count of the
detected pointer.
NPJC-P Negative Pointer Jus-
tification Count - STS
Path Detected
This parameter indicates the decrement count of the
detected pointer.
Table 5-34. STS-1 PM Far-End Parameter Descriptions
Parameter Definition Description
Line
CV-L Code Violation - Line This parameter indicates the number of coding violations
encountered at the Line Layer.
ES-L Errored Second -
Line
This parameter indicates the number of seconds with
one or more coding violations or an incoming defect (AIS-
L) at the Line Layer.
SES-L Severely Errored Sec-
onds - Line
This parameter indicates the number of seconds with x
or more coding violations at the Line Layer, or a second
during which at least one or more incoming defects at
the Line Layer has occurred (Values of x vary dependent
upon the line rate and the Bit Error Rate).
UAS-L Unavailable Seconds
- Line
This parameter indicates the time in seconds that the
Line Layer has been unavailable for data delivery.
Path
CV-P Coding Violations -
Path
This parameter indicates the number of coding violations
encountered at the Path Layer.
Table 5-33. STS-1 PM Near-End Parameter Descriptions (Continued)
Parameter Definition Description