Troubleshooting guide

MX2820 System Manual
5-70 61186003L1-1D
RFI-P Remote Failure Indi-
cation - Path
This condition indicates the unit is receiving a line
remote failure indication (RFI-P is declared when the
incoming path remote defect indication [RDI-P, “1” in bit
5 of the G1 path overhead byte for contiguous frames]
lasts for 2.5 ±0.5 seconds.
TIM-P Trace Identifier Mis-
match - Path
This condition indicates a received signal label is mis-
matched and does not equal the locally provisioned
expected value.
UEQ-P Unequipped - Path This condition indicates the path is unequipped and is
not provisioned (Byte C2 of the STS path overhead is set
to zero).
Table 5-35. STS-1 Alarm Condition Descriptions (Continued)
STS-1 Alarm Definition Condition Description