Troubleshooting guide

Section 5, User Interface Guide - UIG-525, STS-1 MUX PM Statistics
61186003L1-1D 5-75
VIEWING VT/PORT STATISTICS
To access the VT/Port Statistics menu, select the options from each screen listed and then
press
ENTER.
1. Select ACCESS MODULES from the MX2820 Main Menu.
2. Select a number from 1 to 7 for a 19-inch shelf, or 1 to 9 for a 23-inch shelf, from the
Access Module Menus.
3. Select
PERFORMANCE MONITORING from the STS-1 Main Menu.
4. Select
VT/PORT from the Performance Monitoring menu.
Figure 5-42 shows an example of the VT/Port Statistics menu screen.
Figure 5-42. VT/Port Statistics Menu
From the VT/PORT STATISTICS menu screen, options can be selected to view PM data, set
threshold levels, and enable or disable alarms. Refer to the applicable subsection for
additional information.
Shelf: 1 Slot: 4A ADTRAN MX2820 System 04/16/04 09:18
Unacknowledged Alarms: None TID: HTVLALEXD16
VT/Port Statistics
1 - Near End Daily
2 - Near End Quarter Hourly
3 - Far End Daily
4 - Far End Quarter Hourly
5 - Near End Daily Thresholds
6 - Near End Quarter Hourly Thresholds
7 - Far End Daily Thresholds
8 - Far End Quarter Hourly Thresholds
Selection: '?' - System Help Screen