Troubleshooting guide
Section 5, User Interface Guide - UIG-525, STS-1 MUX PM Statistics
61186003L1-1D 5-81
VT/Port Near-End Quarter Hourly Thresholds and Alarms
Select NEAR END QUARTER HOURLY THRESHOLDS from the VT/Port Statistics menu screen.
Input the number of the desired PM parameter, and press
ENTER.
The menu for the selected PM parameter appears. The user is then able to set the threshold to
the desired level and enable/disable an alarm to be issued once that threshold is exceeded.
Figure 5-47 shows an example of the Near-End Quarter Hourly Thresholds menu screen.
Figure 5-47. VT/Port Quarter Hourly Thresholds Screen
NOTE
Options at the bottom of the menu are used to restore all VT/Port
defaults.
Shelf: 1 Slot: 4A ADTRAN MX2820 System 04/16/04 10:43
Unacknowledged Alarms: None TID: HTVLALEXD16
VT/Port Statistics - Near End Quarter Hourly Thresholds
Threshold Alarm
1 - CV-V : 387 Disabled
2 - ES-V : 25 Disabled
3 - SES-V : 4 Disabled
4 - UAS-V : 2 Disabled
5 - CV-L : 387 Disabled
6 - ES-L : 25 Disabled
7 - SES-L : 4 Disabled
8 - LOSS-L : 2 Disabled
9 - AISS-P : 10 Disabled
10 - Restore ALL STS-1, VT, and DS1 Threshold Defaults
11 - Enable ALL STS-1, VT, and DS1 Threshold Alarms
12 - Disable ALL STS-1, VT, and DS1 Threshold Alarms
Selection: '?' - System Help Screen