Troubleshooting guide

Section 5, User Interface Guide - UIG-540, SCU Utilities
61186003L1-1D 5-107
REBOOT SCU
To reboot the MX2820 SCU, perform the following steps:
1. Select SYSTEM CONTROLLER from the MX2820 Main Menu.
2. Select PROVISIONING from the System Controller Menu.
3. Select REBOOT SCU from the Provisioning menu.
Figure 5-76 provides an illustration of the MX2820 Reboot SCU screen.
Figure 5-76. MX2820 Reboot SCU Screen
4. Input a Y, and press ENTER to reboot the SCU; or input an N, and press ENTER to exit the
screen without rebooting the SCU.
5. Return to the MX2820 Main Menu screen by pressing
ESC until the screen appears.
Shelf: 1 ADTRAN MX2820 System 05/04/04 09:29
Unacknowledged Alarms: None TID: HTVLALEXD16
Are you sure you want to reboot?
Execute{Y,N}:
'?' - System Help Screen