Troubleshooting guide
Section 5, User Interface Guide - UIG-540, SCU Utilities
61186003L1-1D 5-109
Figure 5-78. Alarm Relay Tests Screen
4. Input the desired test number and press ENTER.
5. Verify the relay(s) is functioning.
Shelf: 1 ADTRAN MX2820 SYSTEM 05/04/04 09:29
Unacknowledged Alarms: None TID:HTVLALEXD16
Alarm Relay Tests Screen
1 - Toggle Critical Relay Inactive
2 - Toggle Major Relay Inactive
3 - Toggle Minor Relay Inactive
4 - Toggle All Relays
NOTE: Alarm relays are forced to the selected state while in this screen.
Selection: '?' - System Help Screen