Troubleshooting guide

MX2820 System Manual
5-110 61186003L1-1D
Self Test and Restart
This test checks the operation of the SCU, and reboots the SCU. To access the Test screen,
perform the following steps:
1. Select SYSTEM CONTROLLER from the MX2820 Main Menu.
2. Select TEST from the System Controller menu.
Refer to Figure 5-77 on page 5-108 for an illustration of the Test menu screen.
3. Select SELF TEST AND RESTART from the Test menu screen.
Figure 5-79 provides an illustration of the SCU Self Test and Restart screen.
Figure 5-79. SCU Self Test and Restart Screen
Shelf: 1 ADTRAN MX2820 System 05/04/04 09:29
Unacknowledged Alarms: None TID: HTVLALEXD16
Are you sure you want to reboot?
Execute{Y,N}:
'?' - System Help Screen