Troubleshooting guide

MX2820 System Manual
5-124 61186003L1-1D
AutoSave Retries
This field specifies how many times the AutoSave system should attempt to re-send the SCA
file to the TFTP server in the event of TFTP errors before giving up.
SCA Restore Provisioning Screen
This screen is used to display and configure provisions related to SCA restore of access and
MUX module provisions. See Figure 5-90 for the SCA Module Restore Provisioning Screen.
Figure 5-90. SCA Restore Provisioning Options Screen
Pair
This column represents each of the MX2820 module slots 1 through 9 (23-inch chassis) or 1
through 7 (19-inch chassis) and Clock Module C. Provisioning will be restored to the active
module, which will then restore the standby module (if equipped).
CardType
These columns represent the card type identification of the module currently installed in the
corresponding slot of the MX2820.
Restore
These columns represent whether or not SCA restore to the corresponding slot has been
enabled by the administrator. If the field is displayed in inverse video, some condition (such as
an empty slot, user disable, or exclusion due to the card being In-Service) exists that prevents
SCA restore to this slot.
Shelf: 1 ADTRAN MX2820 System 10/10/00 00:15
Unacknowledged Alarms: CRITICAL TID:
SCA Restore Provisioning Options
Pair CardType Restore
C. ............ Yes
1. ............ Yes
2. MX2820 M13.. Yes
3. ............ Yes
4. ............ Yes
5. MX2820 STS1. Yes
6. ............ Yes
7. ............ Yes
- = No Prov-Info
8 - Restore Provisions To SCU : ENABLE x = Unsupported
9 - Restore Provisions To Modules : ENABLE ............ = Empty Slot
Selection :
Normal = Restorable, Inverse = NOT restorable '?' - System Help Screen
(E)nable ALL, (D)isable ALL, (T)oggle ALL