Troubleshooting guide

Section 5, User Interface Guide - UIG-540, SCU Utilities
61186003L1-1D 5-127
TFTP SCA Save Status
This menu choice will bring up the SCA TFTP Save Status screen allowing the monitor of the
status of the TFTP Save system without invoking a SCA Save operation.
TFTP SCA Restore Status
This menu choice will bring up the SCA TFTP Restore Status screen allowing the monitor of
the status of the TFTP Restore system without invoking an SCA Restore operation.
SCA Autosave Status Screen
The SCA Autosave Status Screen, from the SCA Operations menu (Figure 5-92), displays the
status of the SCA Autosave system. There are no user-editable fields on this status-information
screen. These fields are informational displays of the settings present on the SCA Autosave
Provisioning screen.
Figure 5-92. SCA AutoSave Status Screen
AutoSave Filename Prefix and Suffix
These fields are collectively used to construct the name of the AutoSave SCA file on the TFTP
server.
The AutoSave filename prefix is a 0 to 30 character string that will be used to construct the first
part of the SCA filename.
The AutoSave filename suffix is a 0 to 8 character string that will be used to construct the
trailing type, or extent portion of the SCA filename. If a period between the first and second part
of the SCA filename is desired, it should be placed within this suffix field.
Shelf: 1 ADTRAN MX2820 System 10/10/00 00:49
Unacknowledged Alarms: CRITICAL TID:
SCA Autosave Status
Autosave Filename Prefix :
Autosave Filename Suffix : .sca
Current/Next Autosave Instance : 1
Autosave Only If Prov Changes : ENABLE
Cards in Shelf : 3 (SCU,MUX2,MUX5)
Cards With Prov Data : 3 (SCU,MUX2,MUX5)
Cards With Changes : 1 (SCU)
Date/Time of last SCA Autosave : N/A
Date/Time of next SCA Autosave : 10/11/00 00:00:00
Autosave Status : Idle
(S)ave '?' - System Help Screen