Troubleshooting guide

MX2820 System Manual
5-132 61186003L1-1D
PROVISIONING SIMPLE NETWORK MANAGEMENT PROTOCOL
The embedded SNMP feature of the MX2820 allows the unit to be accessed and controlled by a
network manager through the 10/100Base-T local area network (LAN) port.
To provision SNMP options for the MX2820 SCU, perform the following steps:
1. Select SYSTEM CONTROLLER from the MX2820 Main Menu.
2. Select PROVISIONING from the System Controller Menu.
3. Select SNMP from the Provisioning menu.
Figure 5-75 provides an illustration of the Restore Default Provisioning screen.
Figure 5-95. SNMP Provisioning Screen
The options include configuring up to four SNMP Trap Hosts, selecting the ifIndex method,
enabling/disabling SCU traps, and setting the System Name, System Location, System
Contact, Read Community, and Write Community.
Shelf: 1 ADTRAN MX2820 System 07/15/04 10:43
Unacknowledged Alarms: CRITICAL TID:
SNMP
1 - Trap Host 1 IP : 0.0.0.0
2 - Trap Host 2 IP : 0.0.0.0
3 - Trap Host 3 IP : 0.0.0.0
4 - Trap Host 4 IP : 0.0.0.0
5 - ifIndex Method : Fixed (slot-based)
6 - SCU Traps : ENABLE
7 - System Name :
8 - System Location : SysLocation not set
9 - System Contact : www.adtran.com
10 - Read Community : public
11 - Write Community : private
Selection : '?' - System Help Screen