Troubleshooting guide

61186003L1-1D 5-135
UIG-550
Access Module Utilities
INTRODUCTION
This subsection provides the instructions for performing utility tasks for the MX2820 M13,
STS-1 Multiplexer (MUX) modules, and the Clock Module. Utility tasks include the following:
Saving provisioning options
Restoring factory defaults
Resetting modules
Enabling or disabling Auto Save
SAVE PROVISIONING
This feature saves the provisioning data for the access module installed in the selected slot of
the MX2820 shelf.
To save provisioning for an MX2820 access module, perform the following steps:
1. Select ACCESS MODULES from the MX2820 Main Menu.
2. Input a number from 1 to 7 (19-inch shelf), 1 to 9 (23-inch shelf), or letter C for the Clock
Module and press
ENTER.
3. Select
PROVISIONING from the Main Menu screen.
4. Select
SAVE PROVISIONING from the Provisioning menu.
The words PROVISIONING SAVED will display in reverse video at the bottom of the screen.
5. Return to the MX2820 Main Menu by pressing ESC until the screen appears.