Troubleshooting guide

MX2820 System Manual
5-136 61186003L1-1D
RESTORE FACTORY DEFAULTS
This utility restores factory default settings for the access module installed in the selected slot
location of the MX2820 shelf.
To restore factory defaults for an MX2820 access module, perform the following steps:
1. Select ACCESS MODULES from the MX2820 Main Menu.
2. Input a number from 1 to 7 (19-inch shelf), or 1 to 9 (23-inch shelf), or letter C for the
Clock Module and press
ENTER.
3. Select
PROVISIONING from the Main Menu.
4. Select
RESTORE FACTORY DEFAULTS from the Provisioning menu.
Figure 5-96 provides an illustration for the Restore Factory Defaults menu.
Figure 5-96. Restore Factory Defaults Screen
5. Input a Y and press ENTER to restore factory default settings, or input an N and press ENTER
to exit the Restore Factory Defaults menu without restoring the settings.
CAUTION
Restoring factory defaults for a MX2820 access module can inter-
rupt service.
6. Return to the MX2820 Main Menu by pressing ESC until the screen appears.
Shelf: 1 Slot: 4A ADTRAN MX2820 System 09/22/03 01:46
Unacknowledged Alarms: None TID: HTVLALEXD16
Provisioning
Restore Factory Defaults
This operation may interrupt service.
Execute? {Y,N}
Execute? {Y,N} '?' - System Help Screen