Troubleshooting guide

MX2820 System Manual
5-138 61186003L1-1D
AUTO SAVE
The Auto Save feature allows automatic saving of the access module provisioning data.
To enable or disable the Auto Save feature, perform the following steps:
1. Select ACCESS MODULES from the MX2820 Main Menu.
2. Input a number from 1 to 7 (19-inch shelf), 1 to 9 (23-inch shelf), or letter C for Clock
Module and press
ENTER.
3. Select
PROVISIONING from the Main Menu.
4. Select
AUTO SAVE from the Provisioning menu.
Figure 5-98 provides an illustration for the Auto Save menu.
Figure 5-98. Auto Save Menu
5. Input a 2 and press ENTER to enable the feature, or input a 1 and press ENTER to disable the
Auto Save feature.
6. Return to the MX2820 Main Menu screen by pressing
ESC until the screen appears.
Shelf: 1 Slot: 4A ADTRAN MX2820 System 09/22/03 01:44
Unacknowledged Alarms: None TID: HTVLALEXD16
Provisioning
Auto Save: Enabled
1 - Disabled
2 - Enabled
Selection: '?' - System Help Screen