Troubleshooting guide

61186003L1-1D 5-147
UIG-567
IP Port Access
INTRODUCTION
This subsection provides the information regarding the IP port access options.
ACCESSING THE IP SERVICE PORTS ACCESS CONTROL MENU
To access the IP Service Ports Access Control Menu, select the options from each screen listed
and then press
ENTER:
1. Select SYSTEM CONTROLLER from the MX2820 Main Menu.
2. Select PROVISIONING from the System Controller menu.
3. Select
NETWORK MANAGEMENT from the Provisioning menu.
4. Select
IP SERVICES PORT ACCESS CONTROL from the Network Management menu.
Figure 5-102 provides an illustration for the IP Service Ports Access Control menu.
Figure 5-102. IP Service Ports Access Control Menu
Shelf: 1 ADTRAN MX2820 System 03/22/05 09:12
Unacknowledged Alarms: CRITICAL TID: HTVLAL28201
IP Service Ports Access Control
1 - SNMP IP Access Ports(UDP port 161) : ENABLE
2 - TL1 IP Access Ports (2000,2001) : ENABLE
3 - Menu IP Access Ports (23 and 2002) : ENABLE
4 - SSH IP Access Ports (22, 2004, and 2003) : ENABLE
5 - SSH Tunnels : ENABLE
Selection :
'?' - System Help Screen