Troubleshooting guide

61186003L1-1D 6-15
NTP-006
SCU Provisioning (System Security)
INTRODUCTION
This NTP provides the tasks for provisioning the System Security parameters for the MX2820
System Controller Unit (SCU). System security tasks include the following:
• User account management
• Security options, including RADIUS configuration
• Terminal timeout/Auto Logoff
• Network administrator password change
NOTE
It is recommended that the system or network administrator for
the MX2820 system perform the tasks in this NTP.
PREREQUISITE PROCEDURES
Before beginning the tasks listed in this NTP, the system or network administrator should
obtain the user name, password, and access privilege data for all personnel that require a
user account. All other pertinent security should also be obtained before performing these
procedures.
The following procedure must be completed before provisioning the SCU. If necessary, refer to
the appropriate documentation before proceeding.
• “NTP-001, Shelf and SCU Installation”
TOOLS REQUIRED
• VT100 terminal or PC with VT100 Terminal Emulation software
MATERIALS REQUIRED
• DB-9 data cable for the RS-232, serial VT100 interface (Craft interface)