Troubleshooting guide

MX2820 System Manual
7-54 61186003L1-1D
Figure 7-10. TFTP Update Screen
7. Make sure the Firmware TFTP server IP address is set. Consult the network administrator
for this information.
8. Input the Remote Filename where the firmware image is located. This can include a path
and filename to the code image file.
9. Select
INITIATE TRANSFER.
The upload routine begins and provides a status, “Downloading the Image”. When the
status indicates complete, the firmware is successfully uploaded.
10. Press ESC to return to the Module Download Screen.
11. Select the module to upgrade:
• SCU, select S - SCU
• Clock Module, select CA or CB
NOTE
A software upgrade to the SCU must be completed separately from
other modules. It is recommended to complete the SCU first to take
advantage of the new software in the upgrade process for other
modules.
• Other module, select the slot and position (for example, 4B)
Shelf: 1 ADTRAN MX2820 System 05/18/04 15:55
Unacknowledged Alarms: MAJOR MINOR TID: HTVLALEXD16
TFTP Update
1- TFTP Server : 10.200.2.223
2- Remote Filename : downloads/scu/b01.bin
3- Initiate Transfer
Selection : '?' - System Help Screen