Troubleshooting guide

MX2820 System Manual
7-60 61186003L1-1D
NOTE
To select ALL of a particular module type, after entering the slot/
position of the first, press A (all) then press ENTER.
Modules selected for upgrade will be highlighted in reverse video.
10. Press
U then ENTER to initiate the transfer of the code image to each of the selected
modules. The screen will indicate that the software is
“writing.” When complete, the
screen will indicate Done.
11. Reset the module, if necessary.
Many modules will automatically restart their code without taking down the data
interface. In this case, the module display will disappear momentarily and then restore,
indicating the new code revision.
In other cases, the Done indication will remain and a reset of the module is necessary
from that modules Provisioning menu to initialize the new code.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.